CPC506  СPCI 3U 8HP CPU Module
CPC506 is a PICMG 2.30 "CompactPCI Plus" compliant 3U module based on Intel Сore 2 Duo CPUs (from long term manufacturing program) operating at up to 2.2 GHz with 4 MB level 2 cache, featuring
800 MHz system bus and 965GME/ICH8M chipset. The processor executes up to 8 floating point operations per clock cycle and can address up to 4 GB of soldered DDR2 system memory in 64bit mode.

An increased heatsink for CPU and chipset cooling allows efficient heat dissipation within wide ambient air temperature range.

CPC506 is PICMG 2.30 "CompactPCI Plus" compliant and allows to use 32bit PCI bus together with intermodule communication for highspeed data exchange: two Gigabit Ethernet channels, four x1 PCI Express lanes, 4 USB channels.

The graphics controller of Intel 965GME supports output of two independent video streams to two DVID interfaces (8HP modification) or to standard VGA interface.

The firmware of CPC506 supports booting from LAN, from SD cards, from soldered 4 GB flash memory disk, or HDDs, installed on CompactPCI Plus carrier (KIC550) with SATA support, or from drives located on MIC584 mezzanine module. The MIC584 mezzanine module supports SATA II interface with option to mount 1.8" SATA disk drive, SATA DOM solidstate modules and also offers six COM ports, two USB 2.0, PS/2 and audio interfaces.

CPC506 supports Linux, QNX and Windows XP Embedded operating systems.

Board Model Compliance with standards CPU RAM Communications interfaces on the front panel Interconnects of inter-module communication by backplane
PICMG 2.0, PICMG 2.1 PICMG 2.30 PICMG cPCI-S.0 Gigabit
USB PCI PCI Express Gigabit
CPC506 V V Intel Celeron ULV 573, 1,0 GHz,
Intel Core 2 Duo L7500, 1,6 GHz
Intel Core 2 Duo T7500, 2,2 GHz
2 or 4 GB  DDR2  SDRAM 667 MHz, soldered 2×Gigabit Ethernet 2×USB 2.0 32 bit/33 MHz 4x channels ×1 PCI Express
or one channel ×4 PCI Express 
2×Gigabit Ethernet software-based switching between the front panel and backplane 3 × SATA II 4×USB 2.0
  • Intel Core 2 Duo and Core 2 Solo processors (up to 2.2 GHz, 533 or 800 MHz FSB)
  • Up to 4 GB soldered DDR2 SDRAM
  • VGA graphics, resolution up to 2048x1536
  • Intermodule communication (PICMG 2.30): 32-bit PCI bus, 4 x1 PCI Express, 2 SATA II, 4 USB 2.0
  • Two Gigabit Ethernet ports switchable between front panel and backplane
  • MIC584 mezzanine module: 1 SATA II, 6 RS-232/485, 2 USB, PS/2
  • Multiple shock / vibration stability: 50g / 5g (IEC 68-2-27-87; IEC 68-2-6-82)
  • Operating temperature range: –40...+85°С or 0...+70°C (IEC 68-2-14-84)
Brand Fastwel

No Review