LCR Elite1 is a portable LCR meter with unique mechanical and electronic design. It integrates a pair of tweezers like probes and a digital multimeter into one compact, lightweight, battery powered device.
LCR Elite1 is a digital multimeter designed to measure inductance, capacitance and resistance with high accuracy. It provides a simple and efficient solution for measuring and identifying SMD components as well as troubleshooting electronic circuits.
The gold-plated precise tips are designed to contact the SMD components easily and reliably with the size down to 0201.
The 4-wire shielded probe makes parasitic parameters small and very predictable. It improves measurement accuracy and significantly reduces the probability of measurement errors related to setup.
LCR Elite1 simplifies measurements by using the automatic component identification function. It automatically identifies L, C, or R and selects proper testing frequency and circuit mode (parallel or series). Alternatively, user can use manual mode to set the desired parametres for measurement.
Detailed component analysis is provided on the OLED display. The primary display shows component type and value. The secondary display shows Rs (series equivalent resistance) or Rp (parallel equivalent resistance). Testing parameters and battery indicator are also displayed.
LCR Elite1 provides shortcut to go to the default mode quickly. As long as the navigation button is pressed down for approximately 2 seconds, the device goes to the default mode no matter which mode it is currently in.
The device can turn off automatically if neither a measurement is performed nor the navigation button is clicked for approximately 60 seconds. It can also be turned off manually as long as the navigation button is pressed down longer than 5 seconds.
The compact design allows user one hand operation and makes a convenient way to take measurements and read results.
The power consumption is optimized to make the battery last a day for typical measurement. The standby time can be longer than a whole year. It makes the device an ideal choice for broad range of applications and missions, including R&D labs, production lines, service and repair, etc.
|Resistance Range||25mΩ to 10MΩ|
|Capacitance Range||0.3pF to 500uF|
|Inductance Range||100nH to 1H|
|Impedance (Z)||Not Available|
|Dissipation Factor (D)||Not Available|
|Quality Factor (Q)||Not Available|
|Phase Angle (Ө)||Not Available|
|Equivalent Series Resistance (ESR)||Available|
|Direct Current Resistance (DCR)||Not Available|
|Diode Check||Not Available|
|LED Testing||Not Available|
|Self Calibration||Not Available|
|PC Connectivity||Not Available|
|SMD Test Probe||Precise Gold Plated|
|Test Frequency||100Hz, 1kHz, 10kHz|
|Over Voltage Protection (between test tips)||Not Available|